When a furnace stops mid-cycle or an air conditioner blows warm air on the wrong day, the question is simple: who picks up the phone and can actually help. We cover the full range of heating and cooling work in Upper Arlington, from a single faulty component on a system that is otherwise sound to a complete furnace and AC replacement when the equipment has run its course.
Call (380) 289-2879 for a quote and we will go through what the job involves before anything is scheduled.
Upper Arlington is a city where the housing stock runs toward established homes, and established homes tend to have systems that have been working hard for a long time. That means the calls we take here cover the whole range, from a heat pump that needs a refrigerant charge and a defrost check to a duct system that was never properly sealed and has been losing conditioned air for years. Homeowners, property managers, and anyone responsible for keeping a building comfortable through a central Ohio winter and summer can reach us every day from 6:30 AM to 8:00 PM.
From a quick tune-up to a whole-system replacement, the diagnosis comes first, and that is how every call starts. A system that has been running for years may need nothing more than a thorough seasonal check and a filter change. It may also turn up a heat exchanger that is cracking, a compressor that is drawing too much current, or refrigerant levels that have dropped far enough to affect both efficiency and cooling output. The visit covers what the system actually shows rather than what a quick look suggests.
When replacement is the right answer, the conversation starts with sizing the new equipment to the space. A unit that is too large short-cycles and leaves the air humid. One that is too small runs constantly and still cannot hold temperature. We walk through both options, repair and replacement, before anything is scheduled, so the decision is made with full information. The job is understood before anyone is sent out, and we keep you informed from diagnosis to final test.
A ductless mini-split system is the right answer for a specific set of situations, and Upper Arlington has plenty of them. Finished spaces over garages, sunrooms, additions that were built without extending the duct system, older homes where running new ductwork through finished walls would be disruptive: these are the spaces where a mini-split handles both heating and cooling without touching the central system at all.
Installation involves an outdoor unit, an indoor air handler mounted in the space, and a refrigerant line set connecting the two. There is no ductwork to run and no major structural work. The controls are independent, which means the temperature in that space can be set without affecting the rest of the house.
A single outdoor unit can support multiple indoor air handlers in different rooms, which gives a property zoned comfort control without a full ducted zoning system. Each zone runs independently. That is useful in a property where different rooms have different heat loads, or where people in different parts of the house want different temperatures. We handle equipment selection, sizing, and the full installation from the outdoor unit through to commissioning each zone.
A thermostat that is not reading temperature accurately, or a manual control on a system that could benefit from scheduling, is worth replacing. Smart thermostat installation involves checking compatibility with the existing equipment, running the low-voltage wiring at the control if needed, and confirming the system responds correctly to the new control. The visit ends with the thermostat operating and the settings explained.
A heat pump that is not heating effectively in cold weather, or that is icing up and not clearing the ice on its own, usually points to a defrost cycle that is not running properly. Defrost faults can trace back to a sensor, a relay, or a refrigerant charge issue. Because a heat pump handles both heating and cooling from the same refrigerant circuit, a fault that shows up in winter often has implications for how the system will perform in summer. The diagnostic covers both.
An air conditioner that runs continuously without bringing the temperature down is one of the more frustrating calls, because the system appears to be working. The causes range from a refrigerant leak that has reduced the charge below what the system needs, to a condenser coil that is too dirty to reject heat, to a compressor that is running but not building pressure. The visit traces the fault through the system before any part is quoted.
Mini-split installation in Upper Arlington covers the full process: equipment selection for the space, outdoor unit placement, line set routing, indoor air handler mounting, and commissioning to confirm the system heats and cools correctly. We handle the refrigerant connections and the low-voltage control wiring at the equipment. The work gets explained while it is happening, so you know what was installed and how the system operates before the visit closes.
Leaking duct connections send conditioned air into attics, crawl spaces, and wall cavities before it reaches the rooms it was meant to serve. The result is a system that runs longer than it should, energy costs that climb without explanation, and rooms that never quite reach the set temperature. Duct sealing locates the gaps and seals them at the connection points. It is one of the more straightforward improvements on an older system and one of the most commonly overlooked.
Booking an HVAC service call is simple. When you call, you describe what the system is doing, and we go through the scope and the rate on the call before anything is booked. The price is confirmed before we schedule, so you know what the visit covers before anyone comes out. We are available every day from 6:30 AM to 8:00 PM for repairs, installations, maintenance visits, and short-notice calls.
A furnace that stops working overnight or an air conditioner that fails in the middle of a heat stretch is not a situation that waits for a convenient opening in the schedule. We take urgent calls for heating and cooling failures across Upper Arlington and the surrounding area.
When there is no heat in the house or no cooling at all, call (380) 289-2879 and we will work to get the diagnostic and repair scheduled as quickly as the situation allows.
When the property is occupied by tenants, or when a business has to stay open through the work, the visit is set up around that. The scope is discussed on the call, including what parts of the system will be offline and for how long, so there are no decisions made without warning. We treat your home and its system the way we would our own, and that applies to occupied properties as much as to empty ones.
Uneven temperatures across a property are one of the most common complaints we hear, and the cause is almost never the thermostat. A room that stays too warm in summer or too cold in winter while the rest of the house is comfortable usually points to something in the distribution side of the system: a duct connection that has separated, a damper that is stuck, a supply register that is undersized for the room, or a duct run that was never balanced properly.
The diagnostic starts with airflow. Measuring what is actually reaching each supply register gives a clearer picture than guessing from the thermostat reading. From there, the repair might be duct sealing, a damper adjustment, or a recommendation for a zoning upgrade that lets different parts of the house run at different temperatures. A whole-home dehumidifier can also change how a space feels, because air that is too humid feels warmer than the thermometer reads even when the AC is running correctly.
Older homes in Upper Arlington sometimes have duct systems that were designed for the original floor plan and have never been adjusted for additions or finished spaces. Those situations call for a proper airflow assessment rather than a quick fix. The full breakdown is on the HVAC service list.
When you call for a quote, the rate is given on the call before anything is scheduled. What the fault turns out to be, what has to be reached to repair it, and whether a repair or a replacement is the better answer are the things that move the number. A refrigerant leak that is accessible at the service port is a different job from one that has developed inside the coil. A thermostat swap on a standard system is a different visit from one that requires a compatibility check and new low-voltage wiring.
That is the question that comes up most often on older equipment, and it is the one worth asking before committing to either. When a system is old enough that a repair costs a significant fraction of what a new unit would cost, or when the same system has needed multiple repairs over a short period, replacement is worth pricing out alongside the repair. We go through both options on the call so the decision is made with full information.
Ask what the visit covers and you get a straight answer. Pick up the phone and we'll get started.
We serve Upper Arlington and the surrounding area across Franklin County, including Marble Cliff, Grandview Heights, Riverlea, Valleyview, and Hilliard. If you are in one of these communities and need heating or cooling work handled, call and we will confirm coverage for your address.
The work is the same across all of them: diagnosis first, scope and price confirmed before anyone is sent out, and the job carried through to completion. Whether the call is a repair on an existing system or a full replacement, the process starts with a phone call and a straight conversation about what the system needs.
High indoor humidity makes a space feel warmer than the thermostat reads, which puts extra load on the air conditioner and can leave the house feeling uncomfortable even when the system is running correctly. A whole-home dehumidifier integrates with the existing air handler and manages moisture independently of the cooling cycle. If the AC is running but the air still feels sticky, humidity is often part of the reason. Call and we can talk through what an assessment of the indoor air would involve.
Yes. A whole-home dehumidifier integrates with the air handler and ductwork and manages indoor moisture independently of the cooling cycle. It is the most effective way to address humidity across the whole property rather than one room at a time, and it connects to the existing system rather than requiring a standalone setup.
In many cases, yes. Ductless mini-split systems can be added to specific rooms or areas without touching the central system, giving independent temperature control in those spaces. For homes with existing ductwork, a zoning upgrade that adds dampers and a zone controller can divide the system into separately controlled areas. The right answer depends on the existing equipment and the layout of the home.
Call (380) 289-2879 and we will go through what the options look like at your address.
Yes. A well-insulated property with efficient windows retains conditioned air better and requires less equipment capacity than a poorly insulated one of the same square footage. Load calculations account for those factors, which is why sizing is done for the specific property rather than by square footage alone.
Generally, no. A forced-air system is designed to distribute air across all the supply registers, and closing vents can increase pressure in the duct system, which stresses the blower and can cause the equipment to work harder rather than less. If certain rooms are consistently over- or under-conditioned, zoning or duct adjustment is a better solution than closing vents.
That is often the real question once somebody has actually looked at the equipment. A system that is running but struggling, that has needed repeated attention, or that is old enough to be approaching the end of its useful life deserves an honest answer rather than another repair that buys a season.
Call (380) 289-2879 and we will go through what the system is doing, what the diagnostic covers, and whether repair or replacement makes more sense at your address.
We are available every day from 6:30 AM to 8:00 PM. Reach out and we'll work out what it needs.
Other towns where we take heating and cooling work: Hilliard, Dublin, Bexley.
Every heating and cooling job starts with understanding what the system actually needs. We cover the full range of residential and commercial HVAC work across Upper Arlington and Franklin County, from a quick repair to a full system replacement. Call for a quote and the scope and price are settled before anything is scheduled.
| Service Type | What the Service Includes | When You Need It | Good to Know |
|---|---|---|---|
| Thermostat & Smart-Control Installation | Thermostat replacement, Smart thermostat setup and scheduling, Temperature accuracy calibration, Compatibility check with existing system | Homeowners with a thermostat that reads inaccurately or a system that could benefit from programmable scheduling | A smart control can improve how efficiently the equipment runs across the day without any change to the heating or cooling equipment itself. |
| Heating & Furnace Repair | Ignitor and flame sensor service, Heat exchanger inspection, Pressure switch diagnosis, Blower airflow check | Any home or rental unit with a furnace that won't start, blows cold air, or shuts off mid-cycle | Banging on startup often means delayed ignition. A furnace making that sound is worth a diagnostic call before the heating season loads the system. |
| Full System Installation & ReplacementMost Popular | Load calculation and equipment sizing, Removal of old unit, Installation and commissioning, System operation confirmed before visit closes | Homeowners or property managers replacing aging equipment or a system that has needed repeated repairs | A system that is too large short-cycles and leaves the space humid. Getting the sizing right on the replacement is what makes the new system perform the way it should. |
Call (380) 289-2879 and we will work out what your system needs before anything is scheduled.
(380) 289-2879